Agilent 86120B Repair and Calibration Multi Wavelength Meter
Agilent 86120B Multi Wavelength Meter Calibration and Repair Services
Agilent 86120B Error 14 Data acquisition problem. 86120B shows Error 14 (E14) if it cannot detect the internal HeNe Laser during self-test. It is caused by the aging of the HeNe laser in the 86120B. Despite the fact that you may be able to get the equipment back up and running, it is just a matter of time before the laser dies. Have your unit sent to Simbol's Lab for a laser replacement and a full evaluation.
Read moreShow lessAgilent 86120B Error 14 Data acquisition problem. 86120B shows Error 14 (E14) if it cannot detect the internal HeNe Laser during self-test. It is caused by the aging of the HeNe laser in the 86120B. Despite the fact that you may be able to get the equipment back up and running, it is just a matter of time before the laser dies. Have your unit sent to Simbol's Lab for a laser replacement and a full evaluation.
Reference:
86120B_SER
Brand:
Add to compare0
After repair, your 86120B will be returned back to you fully calibrated with a complete calibration report. Other Agilent 86120A/B/C error messages for which a repair or a calibration is needed
- 86120 Error 1 Bad checksum from motor
- 86120 Error 2 Motor communication problem
- 86120 Error 3 Motor not moving
- 86120 Error 4 Motor index pulse not found
- 86120 Error 5 Motor chip set init failed
- 86120 Error 6 Motor communication failure
- 86120 Error 7 Motor not settled
- 86120 Error 8 Motor did not stop
- 86120 Error 9 Motor motion error
- 86120 Error 10 Motor position limit failed
- 86120 Error 11 Motor position wrap failed
- 86120 Error 12 Power level too high
- 86120 Error 13 Data download problem
Depending on the type of calibration you choose, your equipment will be returned to you with a calibration label, a calibration certificate and all related calibration data.
If a unit is not successfully calibrated, we will evaluate the cost to repair the unit and provide you with a quotation. Upon your approval we will perform the necessary repairs and get your equipment back to you in good working condition.